1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
父母加微信好友：关心 子女抱怨没自由：屏蔽
Paddlewheel Flow & Temperature Meter
Models In Stock
- Measures Both Flow and Temperature
- Wide Chemical Compatibility
- 4 to 20 mA or 1 to 5 Vdc Field Selectable Output
- NEMA-4 Housing
FP7002-Series
From
$
836.22
Models In Stock
Product Overview
- Accuracy ± 2 %
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP65, NEMA Type 4
- Loop Resistance, Max Ω = (V supply–12V)/0.02 A
- Operating Pressure, Max 150 psi
- Operating Pressure, Min 0 psi
- Operating Pressure Note Do not exceed maximum ratings of the piping. Depending on the material of the fitting, the operating temperature/pressure may be limited by the piping and not by the sensor. For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C (100°F), 60 psig @ 49°C (120°F) or 30 psig @ 60°C (140°F), owing to thesert the tee. FP7000 sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F) at 18 psig maximum
- Operating Temperature, Max 100 °C
- Operating Temperature, Min 0 °C
- Output Detail current
- Pressure Drop, Max 1.1 psi
- Pressure Drop Note max pressure decreases 1.1 psig per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F) at 18 psig maximum
- Measurement Pressure Type Gauge
- Process Temperature, Max 93 °C
- Process Temperature, Min 0 °C
- Repeatability Error ±1%
- Supply Voltage 12 to 18 Vdc
- Temperature Accuracy ± 1.7 °C
- Viscosity Range 5 cPs
The FP7002 Series Paddlewheel Flow sensor/transmitter flow system provides a low cost, factory
calibrated, simple, and easy to install solution for applications requiring a remote long distance flow
and temperature sensor located away from the main indicating meter or controlinstrumentation. When
ordered with an FP7000 series installation fitting, the sensor/transmitter is factory calibrated to match the
flow rate of the fitting selected. Example: if you ordered an FP7002 sensor/transmitter with an FP7010
PVC fitting, the analog output of the transmitter will be factory calibrated to give 20 mA output at the
max flow rate of 50 GPM and 4 mA out at 0 GPM. The analog output can be converted to 1 to 5 Vdc output
in the field without recalibrating the system. Also now included into the FP7002 design at no extra
charge is an independent temperature sensor/transmitter with an industry standard 2-wire, 4 to 20 mA
loop output scaled over a 0 to 100°C temperature range.
SPECIFICATIONS
Paddlewheel Output
Accuracy: ±2% FS
Repeatability: ±1% FS
Power: 12 to 18 Vdc @ 50 mA max
Output: 3-wire, 4 to 20 mA (1 to 5 Vdc with external 250 Ω resistor)
Max Loop Resistance: &Omega = (Vsupply–12 V)/0.02 A
Wetted Materials:
Sensor Body: Polypropylene
O-Ring: FKM
Paddle: PVDF
Locking Nut:
FP7002: PVC
FP7002A: Brass
Fluid Temperature/Pressure Range: Do not exceed maximum ratings of the piping. Depending on the
material of the fitting, the operating temperature/pressure may be limited by the piping and not by
the sensor. For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C
(100°F), 60 psig @ 49°C (120°F) or 30 psig @ 60°C (140°F), owing to the insert in
the tee. FP7000 sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max pressure decreases 1.1 psig
per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F)
at 18 psig max
Weight:
FP7002: 0.3 kg (0.75 lb)
FP7002A: 0.4 kg (1 lb)
Max Viscosity: 5 cps
Temperature Output
Temperature Range: 0 to 100°C (32 to 212°F)
Accuracy: ±1.7°C (3.1°F)
Power: 12 to 18 Vdc @ 30 mA
Output: 2-wire, 4 to 20 mA (1 to 5 Vdc with external 250 Ω resistor)
Max Loop Resistance: Ω = (Vsupply – 12 V)/0.02 A
PDFs & Manuals
Show Ratings & Reviews
How do I convert to 1-5 VDC output? I do not see anything in the manual
Thank you for your inquiry about the paddle wheel sensor. You will need to install a 250 Ohm resistor to convert to a 1 to 5 Voltage output.
Date published: 2025-08-07